Get quotes

Free tool · SANS 241 and WHO

TDS checker: what your meter reading means

Enter the number from a TDS or conductivity meter. The checker converts it, rates the taste on the WHO scale, compares it with the SANS 241 drinking water limit and, if you have it, classes the hardness.

TDS and water hardness checkerMeter reading
Meter shows
mg/ℓ CaCO₃
0mg/ℓ total dissolved solids
Conductivity
0
Taste (WHO)
0
SANS 241 limit
0
Hardness class
0

TDS is worked out from conductivity with the average factor in the South African Water Quality Guidelines: TDS mg/ℓ ≈ EC mS/m × 6.5 (EC µS/cm × 0.65). The true factor ranges from 5.5 to 7.5 depending on the water. Hardness classes are the ones the guidelines use.

TDS and water hardness checkerFree tool · T-04
TDS limit
1,200 mg/l (SANS 241, aesthetic)
EC limit
170 mS/m at 25 °C
Tastes best
Under about 600 mg/l
Conversion
TDS ≈ EC µS/cm × 0.65
Does not show
Bacteria, lead, pesticides

A TDS meter costs little and gives a number in seconds, but the number only means something next to a standard. This checker compares your reading with the South African drinking water standard, SANS 241, and the World Health Organization's taste ratings.

What TDS measures

Total dissolved solids (TDS) are the salts and minerals dissolved in water: calcium, magnesium, sodium, chloride, sulphate and bicarbonate. Pen meters actually measure electrical conductivity (EC) and convert it to TDS with a factor. The South African Water Quality Guidelines give an average of 6.5 (TDS mg/l ≈ EC mS/m × 6.5), with a range of 5.5 to 7.5 depending on the water. South African lab reports often give EC in millisiemens per metre (mS/m); 1 mS/m is 10 µS/cm.

Most municipal tap water in South Africa reads well within the limits. Borehole water varies widely: some is sweet, some in the Karoo, the Northern Cape and parts of Limpopo and the North West is brackish and hard.

The SANS 241 limits

SANS 241-1:2015 sets an aesthetic limit of 1,200 mg/l for TDS and 170 mS/m for electrical conductivity at 25 °C. Aesthetic means taste and scaling, not immediate health risk: water over the limit tastes salty or bitter, leaves scale in kettles and geysers and can upset people not used to it. The WHO rates water under about 300 mg/l as excellent to taste, 300 to 600 good, 600 to 900 fair, 900 to 1,200 poor and above 1,200 unacceptable.

SANS 241-1:2015LimitType of limit
Total dissolved solids≤ 1,200 mg/lAesthetic
Conductivity at 25 °C≤ 170 mS/mAesthetic
pH at 25 °C5 to 9.7Operational
Turbidity≤ 1 NTU operational, ≤ 5 NTU aestheticOperational, aesthetic
Nitrate as N≤ 11 mg/lAcute health
Fluoride≤ 1.5 mg/lChronic health
Hardness, mg/l CaCO₃Class
0 to 50Soft
50 to 100Moderately soft
100 to 150Slightly hard
150 to 200Moderately hard
200 to 300Hard
Over 300Very hard

A low TDS does not prove water is safe. The meter cannot see bacteria, nitrate, fluoride, lead, arsenic or pesticides. For a borehole, a new source or water that makes people ill, send a sample to an accredited lab for a full SANS 241 test.

What to do about high TDS or hard water

Only reverse osmosis (or distillation) lowers TDS much; the US WaterSense label requires a home RO system to cut TDS by at least 75%. Carbon filters improve taste and smell but leave the minerals. Hard water that scales geysers and kettles can be treated with a softener or a whole-house system. For borehole water, see borehole filtration, and for bacteria, UV treatment. Use the RO output calculator to size a system.

Frequently asked questions

What is a good TDS for drinking water?
Under about 300 mg/l rates as excellent for taste on the WHO scale and 300 to 600 as good. South Africa's SANS 241 standard sets the aesthetic limit at 1,200 mg/l.
Is RO water with a TDS under 50 safe to drink?
Yes. Very low TDS water tastes flat to some people, and many RO systems add a remineralising stage for taste. Your minerals come mostly from food.
Why does my meter read differently from the lab?
Pen meters estimate TDS from conductivity with a fixed factor and are affected by temperature and calibration. Labs measure TDS directly or use a factor suited to the water. Treat a pen reading as a guide.
What counts as hard water?
Hardness is measured as mg/l of calcium carbonate. The South African Water Quality Guidelines class 0 to 50 as soft, 50 to 100 moderately soft, 100 to 150 slightly hard, 150 to 200 moderately hard, 200 to 300 hard and over 300 very hard. Hard water is not a health risk, but it causes scale in kettles, geysers and dispenser hot tanks.

Sources

Every figure the calculator uses comes from these published sources. Read the originals for the full context.

  1. SANS 241-1:2015 Drinking water, Part 1, Table 2 (SABS)
  2. WHO: Total dissolved solids in drinking-water (2003)
  3. South African Water Quality Guidelines, Volume 1: Domestic Use (DWAF, 1996)
  4. US EPA WaterSense specification for point-of-use RO systems (2024)

More water tools

Free quote request

Request water quotes

Fill in the order slip the way a supplier would ask for it: what you need, how many people drink, and where you are. Suppliers who deliver and install in your area quote you directly.

Order slipRef WS-05 · free, no obligation

01What you need

02Sizing (optional, it helps the quote)

FILTER TRAIN

Litres a week
-
Bottles
-
Dispensers
-
Estimate
-

A rule of thumb for the supplier, not a quote.

03Water and timing

04Request list (optional)

  1. 01
  2. 02
Up to 12 lines: units, bottles, filters or visits.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable water dispenser, delivery and treatment suppliers. See our privacy policy.

Get free water quotes